Split System Installation Burwood

Split System Install in Burwood

There’s nothing better than coming to your home on a hot 40-degree day, switching on your split system air conditioning and in just a couple of minutes your house and your family is cool.

Split system air conditioning provides such flexibility, which makes them difficult to beat. But , just like all heaters or coolers to keep them running at their best they should be serviced and maintained to a high standard by skilled professionals. Melbourne Ducted Heating Service offers experienced technicians who are familiar with split system air-conditioners in and out. They specialize in all models and models and give you assurance that they are able to complete the task at a professional level.

We offer a wide range of services that include the following:

• Split System Installation Burwood
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and certified for all sorts of tasks. If you’re searching for split system installation in Burwood services then contact Local Heating and Cooling Professionals Burwood today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

Air conditioning splits have their name because of half the system (condenser) being outside the house , while the second part (fan coil) is inside. When it cools, hot air that is inside the room is taken in through the fan coil, and then taken out, resulting into cool air recirculating back into the house. The reverse cycle permits heating pumps to operate in reverse to provide heat on cold winter days.

Air conditioning split systems can be placed in rooms, areas or even multiple rooms connected by copper piping connecting to the outdoor unit (condenser). Multi-head split air conditioning systems can be used for at least nine rooms, with only one outdoor unit, and allow for individual temperature control of each room.

What Are The Running Costs With Split Systems?

One of our recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular heating & cooling during the winter and summer periods, the annual running cost would be measured at $272.34.

The reduction of the Split System Operating Costs

It’s not hard to lower your running expenses by using a Split System. Based on the model you purchase, and it’s respective star rating, you will be able to determine how you’ll save each year. However looking beyond the initial price to how you will use the Split System can help as well.

Guide to Operating A Split System

• Set the thermostat to 24C and 26C to allow for cooling. Every degree lower in summer will increase the running costs by approximately 10%..
• Make use of the economy setting when your split has one and regularly service your air cooling system.
• Keep the sun’s heat out by closing curtains and external blinds during the daytime. Close windows and doors to areas that are cooling when you have the split unit operating.
• When the split system is switched off and its cooler outside, open doors and windows to let the cool air in.
• Insulate your property to help keep the summer heat out and the cold inside during winter.
• Dress to suit the weather.

Why Choose A Split System?

The wall mounted air conditioning system is the most frequently owned by homeowners who own a residential air conditioning system because they are cost-effective and easy to maintain.

Inverter Technology

Inverter technology is the key to more comfort throughout the year because it maintains the temperature constant, cuts costs (less energy use) and produces a lesser amount of noise when employed. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall-mounted divided AC models are most economical option for a single room apartment, small home or even a studio as they are comparatively inexpensive to purchase (depending on how many indoor units you need) and don’t need installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to regulate the space it is installed in, thus each room can have a different temperatures.

Air Quality

A lot of Split air conditioners come with air filtering functions and humidity control which regulate the amount of dust and humidity inside a room. This allows for sensitive customers (children or elderly, asthmatic or allergic people) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to a single outdoor condenser that in turn provides you with satisfaction of having the best cooling system (in terms of output and physical restrictions) to a specific space.

Split System FAQ

Are split systems the same as the air conditioning?

Absolutely, Split System is an air conditioning system. There are various types of air conditioning system which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate on electricity & refrigerant under the same principle, but are different in terms of installation.

What is the time frame to install a split-system air conditioner?

Generally speaking, a single split-system air conditioner installation should last between 3 and 6 hours. The exact length of time can vary based on many factors such as below;

• Size and location of both indoor and outdoor unit
• The route of copper pipes between indoor and outdoor unit
• Electrical connections from main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In most situation, if your air conditioner is over > 10 years old and you have evident issues with the A/C, there is a good chance that it could be more affordable to replace than repair.

To help you make the best decision To make the right choice, consult with the staff at ComfyHome to get an honest opinion on the condition of your air conditioner.

What size split system air conditioning will I require?

A common measurement ratio is to multiply the area of the room by a ratio of 0.15 to get the needed power of the unit in Kilowatts.

If you have a room size of 40sqm, you should require a split system air conditioning unit with 6 kW. A unit with a cooling capacity of 2.5kW is suitable for 10 -20 sqm room areas.

However, the size of the Split system’s required air conditioning can also be affected by other variables such as how well the insulation is in place, the size of the room, and’ position.

For an accurate assessment of the required Split dimension, we recommend you contact us for a comprehensive analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general the air conditioner is built to last 10-20 years, on an average. However, this is contingent upon a myriad of variables, including the brand of the A/C it is installed on, the quality of its installation, routine maintenance history etc…

It is vital to check the maintenance of your Split System Air Conditioner frequently to extend its lifespan and improve effectiveness.

Do I need to wash my air conditioner’s air filter?

In accordance with Daikin Australia, it is strongly recommended that you wash your air conditioner’s filters every two weeks in order to boost the system’s efficiency and potentially reduce your energy consumption by 5 to 15%.

Burwood Gas Heating Services

• Ducted Gas Heating Servicing & Repair Burwood
• Gas Log Fire Service & Repairs Burwood
• Burwood
• Evaporative Cooling Repair Burwood
• Carbon Monoxide Testing Burwood
• Gas Heating Repairs Burwood
• Gas Heating Burwood
• Vulcan Ducted Gas Heating Servicing & Repair Burwood
• Brivis Ducted Gas Heating Servicing & Repair Burwood
• Gas Heating Service Burwood
• Braemar Ducted Gas Heating Servicing & Repair Burwood
• Gas Hot Water System Installation & Repairs Burwood
• Gas Appliance Servicing & Repair Burwood
• Gas Heating Installation Burwood

What Types of Systems We Service & Repair

Each brand and style of heating has it’s specific operation and maintenance needs Our highly skilled technicians have the insight and know how to provide the best service for all heating systems including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in the field of heating repairs and maintenance that specialize in all kinds and brands of heating systems. We pride ourselves on a rapid response time and dedication to quality, efficiency and reliability.

We are able to maintain and service all leading brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reputation & Reviews
• We’re friendly and personable.
• Experienced & Licenced Team
• Get a Quote With No obligation

Our Promise To You

We at Melbourne Ducted Heating Service we understand the frustration of not having hot water, and it’s something we don’t think anyone should have to experience. This is the reason we place such a high priority on emergencies with hot water. All of our plumbers are reliable and friendly We are able to assist you in any situation.

We are proud of our customer service and it is our belief that even the little things matter the most.

We take pride in our great customer service, Here’s why our clients appreciate us:

• We always show up when declare that we will.
• Our techs will give you a an appointment when they are 30 minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always cleaning up after ourselves.

At Melbourne Ducted Heating Service offer emergency and maintenance services for plumbing, electrical and heating. If you have any questions regarding our services or what we provide, we are here to help.